Water Heater Unit Installation Instructions Ford Ranger

Water Heater Unit Installation Instructions Ford Ranger is a pdf Books Car/Motorcylce Owners manual all User document guide that has been posted to category Car Owners. We try to help you provide information about Water Heater Unit Installation Instructions Ford Ranger. You can read the summary of Water Heater Unit Installation Instructions Ford Ranger before you save or download full the pdf Books Car/Motorcylce Owners manual all User guide file. I hope you can solve your Car/Motorcylce problem with this Car Owners. Here is the overview of Water Heater Unit Installation Instructions Ford Ranger :

Water Heater Unit Installation Instructions Ford Ranger :

Preparing installation location Water Heater Unit Installation Instructions Ford Ranger

Loosely mount bracket 1 with M6x20 bolt 2 on existing threaded hole and align vertically.

  • 3 Copy hole pattern (3x)
  • 1 Drill 9.1 mm hole; install rivet nuts (3x each)
  • 1 M6x30 bolt, spring lockwasher, bracket, large diameter washer, 5 mm shim, pin lock

Installing heater unit

  • 1 M6x20 bolt, spring lockwasher (2x each)
  • 2 M6x30 bolt (2x each) premounted
  • Connect wiring harness 2 before installing heater unit 1. Tighten EJOT screws to 10 Nm! 3 Ejot screw (2x)
  • Tighten EJOT screws to 10 Nm! 1 Ejot screw (2x)

Exhaust system

  • 1 Exhaust pipe = 750 mm
  • 2 Exhaust end section = 250 mm

Ensure freedom of movement of neighboring parts.

  • 1 Hose clamp
  • 2 Exhaust pipe
  • 3 Align red (rt) rubber isolator
  • 1 Rivet nut in existing hole
  • 1 M6x20 screw, spring lock washer, angle bracket
  • 2 Muffler, M6x20 bolt, flanged nut on angle bracket

2.5 mm dia. hole 4 in exhaust pipe 2 for draining off condensed water at lowest point.

  • 1 Hose clamp
  • 3 M6x40 bolt, 20 mm shim, p-clamp, flanged nut on existing hole

Replace original vehicle bolt 5 with M6x20 bolt and large diameter washer.

  • 1 Exhaust end section
  • 2 Hose clamp
  • 3 M6x20 bolt, p-clamp, flanged nut on angle bracket
  • 4 Angle bracket, flanged nut
  • 1 Cut out wheel well trim
  • Align exhaust end section 1 as shown.

If you find this pdf Books Car/Motorcylce Owners manual all User guide about Water Heater Unit Installation Instructions Ford Ranger is useful to solve your Car/Motorcylce problem, you can download this full Books Car/Motorcylce Owners manual all User pdf file and save to your computer/laptop. If you do not find solution after reading the summary of Water Heater Unit Installation Instructions Ford Ranger, you can find others Car Owners or others Books Car/Motorcylce Owners manual all User on the right sidebar. Please click the download button below :

Popular Manuals

Latest Manuals

Related PDF Manuals