MANUAL 1975-1979 HONDA GL 1000 WINDJAMMER IV VINDICATOR II MOUNTING GUIDE

MANUAL 1975-1979 HONDA GL 1000 WINDJAMMER IV VINDICATOR II MOUNTING GUIDE is a pdf Books Car/Motorcylce Owners manual all User document guide that has been posted to category Honda Manuals. We try to help you provide information about MANUAL 1975-1979 HONDA GL 1000 WINDJAMMER IV VINDICATOR II MOUNTING GUIDE. You can read the summary of MANUAL 1975-1979 HONDA GL 1000 WINDJAMMER IV VINDICATOR II MOUNTING GUIDE before you save or download full the pdf Books Car/Motorcylce Owners manual all User guide file. I hope you can solve your Car/Motorcylce problem with this Honda Manuals. Here is the overview of MANUAL 1975-1979 HONDA GL 1000 WINDJAMMER IV VINDICATOR II MOUNTING GUIDE :

MANUAL 1975-1979 HONDA GL 1000 WINDJAMMER IV VINDICATOR II MOUNTING GUIDE :

Here it is pdf content previews:
These instructions explain the procedure required to mount either the Windjammer IV or Vindicator II fairing to your motorcycle. We urge you to follow the preparation and assembly sequence from start to finish. This will benefit you directly in several ways:

You will be assured the fairing is properly installed and is immediately ready for operation.
You will minimize unnecessary confusion, moaning and scraped knuckles.
You will protect your investment by doing it right, and
With the confidence that nothing has been overlooked, you won’t have to waste time backtracking to correct mistakes. That’s time you could spend riding.
Prepare the motorcycle

Put the motorcycle on its centerstand. Remove the 3 phi Hips head screws in the headlight shell. Disconnect the 3-prong plug and remove the headlight. It will not be reused.
Detach the right and left turn signal wires from their connectors: 2 green ground wires, 1 orange (left) and 1 light blue (right) turn signal wires, and 2 brown/white running light wires.
Unscrew the amber reflectors on each side of the nacelle. Remove the rubber grommets and put the reflectors aside to be reused.
REMOVE THE TURN SIGNALS CAREFULLY. PULLING TOO HARD ON THE WIRES WILL BREAK THE CONNECTIONS AT THE BULB.

Pull the turn signal wires out of the headlight nacelle. Pull down on the plastic strain relief on the headlight stays and remove the relief from the wires.
Remove the rubber grommet behind the nacelle bracket.
Unscrew the stalks and pull the wires through the mounting holes. (Illus. ?)
If you are installing a Vindicator, put the turn signals aside to be remounted.

If you find this pdf Books Car/Motorcylce Owners manual all User guide about MANUAL 1975-1979 HONDA GL 1000 WINDJAMMER IV VINDICATOR II MOUNTING GUIDE is useful to solve your Car/Motorcylce problem, you can download this full Books Car/Motorcylce Owners manual all User pdf file and save to your computer/laptop. If you do not find solution after reading the summary of MANUAL 1975-1979 HONDA GL 1000 WINDJAMMER IV VINDICATOR II MOUNTING GUIDE, you can find others Honda Manuals or others Books Car/Motorcylce Owners manual all User on the right sidebar. Please click the download button below :

Popular Manuals

Latest Manuals

Related PDF Manuals