INTAKE SYSTEMS #520-152 INSTALLATION INSTRUCTIONS 04-06 Nissan Titan / Armada 5.6L

INTAKE SYSTEMS #520-152 INSTALLATION INSTRUCTIONS 04-06 Nissan Titan / Armada 5.6L is a pdf Books Car/Motorcylce Owners manual all User document guide that has been posted to category Car Owners. We try to help you provide information about INTAKE SYSTEMS #520-152 INSTALLATION INSTRUCTIONS 04-06 Nissan Titan / Armada 5.6L. You can read the summary of INTAKE SYSTEMS #520-152 INSTALLATION INSTRUCTIONS 04-06 Nissan Titan / Armada 5.6L before you save or download full the pdf Books Car/Motorcylce Owners manual all User guide file. I hope you can solve your Car/Motorcylce problem with this Car Owners. Here is the overview of INTAKE SYSTEMS #520-152 INSTALLATION INSTRUCTIONS 04-06 Nissan Titan / Armada 5.6L :

INTAKE SYSTEMS #520-152 INSTALLATION INSTRUCTIONS 04-06 Nissan Titan / Armada 5.6L :

Installation Instructions. Read Me! 1. Disconnect the negative battery cable, then, loosen the hose clamp on the factory intake tube. Disconnect the electrical connector from the Mass Air Sensor and unclip the wiring from the air box lid. 2. Unclip the factory air box lid from the base and remove from engine compartment. Remove original flat panel filter. 3. Using a Phillips screwdriver, remove the Mass Air Sensor from the air box lid. Retain sensor for later use. 4. Remove the factory air box base from the vehicle. Unsnap and remove the factory tube from inside the air box as shown in picture. Re-install factory air box base on vehicle with out the tube. 5. Assemble the Airaid Cool Air Dam using the #6 hardware provided. Install the plastic air filter adaptor using the ¼- 20 bolts and washers provided. 6. Install the factory Mass Air Sensor in the Airaid air filter adaptor using the 10-32 screws provided. 7. Remove the clip from the factory air box lid and install it in the Airaid Cool Air Dam as shown above. 8. Install the Airaid Cool Air Dam assembly on the factory air box base using factory clips. Tighten factory hose clamp. 9. Install the connector on the Mass Air Sensor and mount the factory wire harness clip in the Airaid Cool Air Dam panel.  10. Install the Airaid filter and tighten hose clamp. 11. Install the supplied weather strip on Cool Air Dam. (Note:  Start at one corner and work your way around to the ends to insure proper placement.) 12. Double check your work to be certain that all nuts, bolts, and clamps are securely fastened. 13. Reconnect the negative battery cable.

If you find this pdf Books Car/Motorcylce Owners manual all User guide about INTAKE SYSTEMS #520-152 INSTALLATION INSTRUCTIONS 04-06 Nissan Titan / Armada 5.6L is useful to solve your Car/Motorcylce problem, you can download this full Books Car/Motorcylce Owners manual all User pdf file and save to your computer/laptop. If you do not find solution after reading the summary of INTAKE SYSTEMS #520-152 INSTALLATION INSTRUCTIONS 04-06 Nissan Titan / Armada 5.6L, you can find others Car Owners or others Books Car/Motorcylce Owners manual all User on the right sidebar. Please click the download button below :

Popular Manuals

Latest Manuals

Related PDF Manuals