Installation Instructions Chevrolet Venture Lower Vehicle Exhaust

Installation Instructions Chevrolet Venture Lower Vehicle Exhaust is a pdf Books Car/Motorcylce Owners manual all User document guide that has been posted to category Car Owners. We try to help you provide information about Installation Instructions Chevrolet Venture Lower Vehicle Exhaust. You can read the summary of Installation Instructions Chevrolet Venture Lower Vehicle Exhaust before you save or download full the pdf Books Car/Motorcylce Owners manual all User guide file. I hope you can solve your Car/Motorcylce problem with this Car Owners. Here is the overview of Installation Instructions Chevrolet Venture Lower Vehicle Exhaust :

Installation Instructions Chevrolet Venture Lower Vehicle Exhaust :

  1. Lower vehicle exhaust by lowering the exhaust hanger on the passenger side.
  2. If present, lower load leveling compressor on driver’s side, (1) M10 bolt & (2) M6 nuts.Note:If necessary, trim vertical tab on compressor bracket to clearadjacent M10 bolt.
  3. Raise hitch into position. Install M10 X 1.50 X 45mm CL9.8 bolts into existing weldnuts, both sides.
  4. Using rearmost holes in hitch side brackets as a template drill1/2”holes in vehicle frame rails.On 2004’and older long wheel base models: It will be necessary to drill a 1/2”hole thru frame at forward most hole on passenger’s side bracket.
    On 2004’and older short wheel base models: Forwardmosthole in passenger’s side bracket will line up with existing slot in vehicle frame rail.
    0n 2005’and newer models: Forwardmostslot in passenger’s side bracket will line up with existing weldnutin vehicle frame rail.
  5. On passenger’s side, fishwirecarriage bolt and blocks thru existing slot in frame rail down into forwardmosthole as shown. Secure using blocks, lock washers and nuts as follows:
    2004’& older short wheel base models only: Place (2) blocks betweenframe rail and hitch as shown.
    2004’and older long wheel base models only: Place (2) blocks between hitch and lock washer as shown.
    2005’and newer models only: Install M10 X 45mm CL9.8 bolt thru vehicle fender support bar then thru slot in hitch and into existingweldnutin vehicle frame.
  6. Install handle nut thru square hole inside of vehicle frame railand install hex bolt and lock washer thru rearmost hole (drilled in step 4) as shown, both sides.
  7. Remove M10 fasteners to reattach exhaust hanger and load leveling compressor and reinstall fasteners. Note:On all wheel drive models, it will be necessary to pass exhaust hanger thru 3”long slot in side bracket and use (2) 1/4”blocks as shown in figure 2 and figure 3, to reattach exhaust hanger bracket.

If you find this pdf Books Car/Motorcylce Owners manual all User guide about Installation Instructions Chevrolet Venture Lower Vehicle Exhaust is useful to solve your Car/Motorcylce problem, you can download this full Books Car/Motorcylce Owners manual all User pdf file and save to your computer/laptop. If you do not find solution after reading the summary of Installation Instructions Chevrolet Venture Lower Vehicle Exhaust, you can find others Car Owners or others Books Car/Motorcylce Owners manual all User on the right sidebar. Please click the download button below :

Popular Manuals

Latest Manuals

Related PDF Manuals