All Instructions Before Beginning Installation 2011 & Up Hyundai Sonata

All Instructions Before Beginning Installation 2011 & Up Hyundai Sonata is a pdf Books Car/Motorcylce Owners manual all User document guide that has been posted to category Car Owners. We try to help you provide information about All Instructions Before Beginning Installation 2011 & Up Hyundai Sonata. You can read the summary of All Instructions Before Beginning Installation 2011 & Up Hyundai Sonata before you save or download full the pdf Books Car/Motorcylce Owners manual all User guide file. I hope you can solve your Car/Motorcylce problem with this Car Owners. Here is the overview of All Instructions Before Beginning Installation 2011 & Up Hyundai Sonata :

All Instructions Before Beginning Installation 2011 & Up Hyundai Sonata :

  • LOCATION (See Diagram below): Run masking tape as shown using measurements in Diagram A below from POINT A to POINT B. Press tape against the vehicle, making sure that the tape is straight from POINT A to POINT B.
  • CLEAN AND PREP: Clean the surface where the molding is to be installed using the alcohol pads enclosed for proper installation of Lower Chrome Molding. Wipe off excess residue with a clean cloth. Next, apply PRO-BOND ADHESIVE PROMOTOR in the crush swab self-applicator. Squeeze the applicator until you feel the applicator “crush”. The applicator will become wet on the end and is ready for use. Apply a thin coat of PRO-BOND below the masking tape line, only on the shaded area, as shown in Diagram A above. Do not apply PRO-BOND in any area that the molding will not cover, as PRO-BOND could dull the paint surface. The light coat of PRO-BOND will dry quickly. Where cooler temperatures prevail, make sure the molding is at room temperature. The recommended metal surface temperature of the vehicle should be at least 75°F/24°C for proper installation. If the surface is cold, use a heat gun or hair dryer to warm before proceeding with installation.
  • INSTALLATION (IMPORTANT): Before starting, see Diagram B as to where to start applying molding. Next, completely peel off all of the liner from back of molding, making sure die cut ends of red liner are also removed from molding. DO NOT TOUCH the exposed adhesive with your fingers as the installation is being done. Since these moldings have been pre-cut, start adhering moldings rear piece first with the angle or bevel cut first and the finished end directed toward the rear wheel well. Next, install front door molding following Diagram B measurements.
  • AFTER THE MOLDING has been installed, use a soft cloth and apply pressure along the entire length of the molding to insure proper adhesion.

If you find this pdf Books Car/Motorcylce Owners manual all User guide about All Instructions Before Beginning Installation 2011 & Up Hyundai Sonata is useful to solve your Car/Motorcylce problem, you can download this full Books Car/Motorcylce Owners manual all User pdf file and save to your computer/laptop. If you do not find solution after reading the summary of All Instructions Before Beginning Installation 2011 & Up Hyundai Sonata, you can find others Car Owners or others Books Car/Motorcylce Owners manual all User on the right sidebar. Please click the download button below :

Popular Manuals

Latest Manuals

Related PDF Manuals